How to clean phone speakers?

One of the most annoying things about having your cell phone is that after a while you begin to hear mumbling coming out of it. You can’t quite make out what they are saying or who it is, but there is some faint sound emanating from your phone’s speaker. This problem isn’t due to some great mystery; if you’ve heard these odd noises on your cell phone before, then maybe someone was trying to make an important message come across without being able to actually talk on their device. Luckily, there are ways for you to fix this issue yourself at home! Read on below for our step-by-step guide on how to clean phone speakers.


Often all it takes is some time to clean the speaker in your phone if the sound quality is not as good as it used to be. Using a speaker regularly will collect dust and dirt on its surface. You can increase the chances of the layers of dust getting caked on by avoiding cleaning it for a longer period of time. Speakers will not function to their fullest potential in this environment. Do not be alarmed. The speaker area on your phone requires more attention and care since it is delicate. While cleaning the rest of your phone is easy, cleaning the speaker area takes more time and effort.

Read More: An Overview of anime streetwear and its trend in the world

Here are some reasons why you should clean your phone speaker regularly:

Regularly cleaning the speaker area of your phone will prevent dirt from entering the surface. Overlooking the need to clean the phone occasionally may result in the stubborn dust caked on the phone permanently damaging it. Additionally, you may experience audio when making phone calls.

We will show you in this article how you can clean this delicate part of your phone methodically, even though it may seem tricky. First off, grab your supplies which include:               

       Cotton swab:                                             

              First, remove the back of your phone. This will vary in difficulty based on what type of cell phone you have and how old it is. With an older phone, you might need a small screwdriver or flat-head to help pay off the back panel. Honebackcoveropenedpng.png There should be some screws that hold your battery in place; you can leave these where they are unless you want to take them out for some reason. Once you have removed the back panel, look for a small opening on my battery where your headphone cord plugs into the device.

       Next, take one end of a cotton swab and stick it in this hole to clean out any dirt or debris that might be stopping your music from coming through clearly. If your phone is old enough, you may need a pin or needle to help you gently remove dust bunnies from hard-to-reach areas inside the phone. Just make sure not to damage anything! It will feel like you’re “hacking” away at parts of your phone, but it’s much better than the alternative. Once you believe your phone is spotless inside and out, replace the battery and turn it on. If there was no change in sound quality when you were cleaning, then try plugging an auxiliary cord into your headphone jack to see if that makes a difference.

Simple steps:

The first method is to use a toothbrush:

When cleaning the speaker on your phone, be sure to wash your hands first. Keeping dirt from your hand off of your phone will prevent it from getting dirty. Once your hands have been washed and dried, use a clean towel to remove water. Before you begin cleaning, turn off your phone. This is essential. If your phone is on, you shouldn’t clean it. You can start cleaning as soon as the phone is turned off. It is advisable to use a soft-bristled toothbrush. Even an old toothbrush can be used for this purpose, but be sure to clean it first! You can reuse your child’s spare toothbrush since children’s brushes are softer than adults’.

If you are not sure where the speaker port is on your phone, look for it. Scrub it gently with the toothbrush. It’s important not to scrub harshly when cleaning your phone’s speaker because the bristles will cause damage if they get inside. Brush your phone lightly for the best results.

The second method uses tape:

You could roll the tape into a cylinder by starting with a short piece of tape. Position it so that the sticky side faces the outside. Your phone speaker will be taped on once you press the tape. As a result, most of the dirt deposited inside and around your speakers is attracted by the sticky side. As the tape gets dirty, remember to replace it. If the tape appears dirty, replace it. It means it has been cleaned mostly.

Other simple methods:

  These are very simple steps to clean your speaker! It should make music or audio coming from your cell phone crisper and easy to understand again. Keep up the good work cleaning those speakers at home! A few more benefits of cleaning your cell phone shrine include not having to worry about getting dirt on any keys on the keypad during playtime with friends after school or hiding anything secret from your parents.

The maintenance of audio technology:

Keep your phone out of humid places like the bathroom. The speaker’s audio quality eventually suffers when moisture accumulates around it. Keeping dust and moisture away from around your phone’s speaker can be quite challenging. Regularly clean the area with a lint-free cloth. Protect your phone against dust and dirt by using a high-quality case.

So there you go! You should always clean the speaker of your phone once a week even if you have no issues with the sound. Dirt tends to build up over time. To enjoy the best quality sound from your phone, follow the above methods to clean your speakers often.

Can you clean the speaker on my phone with alcohol?

Don’t. Do not use any liquid, not even rubbing alcohol. While water does evaporates faster quickly over rubbing alcohol, anything liquid and also the internal components of iPhones should not be combined. Use fresh air instead of compressed air.